Product description
810-CID2322L
About 8TEN
8TEN Parts provides lawn & garden replacement parts. Some of the 8TEN Parts product categories include blades, spindles, pulleys, idlers, and chainsaw chains. 8TEN Parts are here for when you need them the most.
8TEN Idler Pulley Part Number 810-CID2322L
Includes: 8TEN Idler PulleyCompatible with the following brands: Murray, Briggs & Stratton, Snapper, CraftsmanCompatible with the following models: 301123BV, 301123BVE, 3011523BV, 3012523BVE, 301323BVE, 3013523BVE, 250815BE, 250815B, 250816BE, 250816B, 281016BE, 301016BE, 301216BE, 281318BE, 301318BE, 280922B, 281022BE, 281023BVE, 281123BV, 281123BVE, 281123HVE, 2811523BV, 281222BE, 281223BVE, 2812523BVE, 281320BE, 107.280341 (7800669A)Replaces for the following OEM MPN’s: 7029624YP, 7029624
Inner Diameter: 3/8 Inches Outer Diameter: 34 Inches Height: 13/16 Inches
Idler Pulley Dimension Terms
Width: The distance from side to side of the pulley, the area where the belt is foundInside Diameter: The distance across the center hole, This dimension should match the diameter of your shaft or boltOutside Diameter: The distance across the circle of the product, from outside edge to outside edge. For flat idler pulleys, this will include the flanges
Back Side Offset: The width from the center of the pulley to the backside edge of the hub or bore adapterFrontside Offset: The width from the center of the pulley to the front edge of the hub, bearing, or bore adapterThroughbore: Length of the bore, from one edge to the other. The Frontside Offset and Backside offset together equal the length of the throughbore
Bearing ID: The inside diameter of the bearing used in the pulleyFlanges: These are protrusions out from the center of a pulley, designed to keep a belt from slipping offStickout: The distance from the edge of the pulley’s flange to the edge of the bore adapter or hub.
8TEN Idler Pulley Uses
Redirect the beltKeep the belt in placePress against the belt to cause the belt to engageThe goal of an 8TEN idler pulley is to move power or items from one place to another8TEN idler pulleys move power by having a drive pulley attached to a motor, that will cause another pulley, the drive pulley, to spinIdler pulleys are pulleys in a system that are not connected directly to the power source, and cannot increase speed or torque
Compatible with OEM Part Numbers Murray 7029624YP, Briggs & Stratton 7029624
Compatible with Snapper 301123BV, 301123BVE, 3011523BV, 3012523BVE, 301323BVE, 3013523BVE, 250815BE, 250815B, 250816BE, 250816B, 281016BE, 301016BE, 301216BE, 281318BE, 301318BE, 280922B, 281022BE, 281023BVE, 281123BV, 281123BVE, 281123HVE, 2811523BV, 281222BE, 281223BVE, 2812523BVE, 281320BE
Compatible with Snapper 281323BVE, 2813523BVE, 300922B, 301022BE, 301222BE, 301320BE, 250814BE, 250814B, 280914BE, 280915BE, 281014BE, 300914BE, 300915BE, 301014BE, 301214BE, 301215BE, HWPS26600RV, HWPS26700BV, 2811524BV, 2812524BVE, 3014524BVE
Compatible with Craftsman 107.280341 (7800669A)
Inner Diameter (ID) 3/8 Inch; Outer Diameter (OD) 4 Inch; Height 13/16 Inch
randy ussery –
Drop in replacement no issues for a snapper 33 inch rear engine rider
It was a perfect replacement for my snapper 33 inch rear engine rider. The either pulley was easy to install work like a champ.
ROBERT J PAUWELS –
DID THE JOB
did the job
bladenbullet –
Perfect fit
Brought our rider back to its original quiet operation.
Garrett –
It did the job
I used this on a Snapper 30″ riding mower and it worked perfectly.
Brian Stuetelberg –
Works great
Fits old snapper ride perfectly
AudiJens –
Funktioniert einwandfrei in meinem Snapper👍.